Introduction to Vertical folding Sectional Door, Sectional Door advantages, characteristics and principles

Vertical folding Sectional Door It is a kind of door equipment used for the entrance and exit of industrial places.，multifunctional, with functions such as Sound insulation and noise reduction, smooth running, sturdy and durable, attractive and durable and Wind resistance and stability，it is widely used in logistics, industry, aviation, industry and logistics，was developed and designed by Anbixin。The following is to introduce the Vertical folding Sectional Door :

1、Brief introduction of Vertical folding Sectional Door

Vertical folding Sectional Door Also known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，It has a wide range of uses, including Cold chain storage place, Industrial workshop warehouse, Automobile manufacturing workshop, Logistics distribution center and Aircraft maintenance depot。

Vertical folding Sectional Door

2、Introduction of Vertical folding Sectional Door characteristics

Vertical folding Sectional Door has the following characteristics

1. Efficient heat preservation and energy saving

Effectively reduce heat loss and save energy consumption.

2. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

3. Flexible installation mode

Adapt to different scenes, convenient installation.

4. Smooth and quiet operation

Low noise during operation and comfortable experience.

5. Tightly sealed and dustproof

Prevent dust and sundries from entering the room.

Vertical folding Sectional Door

3、Physical picture of Vertical folding Sectional Door

Vertical folding Sectional Door high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Vertical folding Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

4、Advantages of Vertical folding Sectional Door principle

The Vertical folding Sectional Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

5. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

Vertical folding Sectional Door

5、Vertical folding Sectional Door advantage

Vertical folding Sectional Door s have the following advantages.

1. Various control methods

Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

2. Safe and reliable

Equipped with multiple safety devices such as anti-falling and infrared induction, it runs smoothly and ensures the safety of personnel and goods.

3. Strong wind resistance

The structural design is reasonable, and some lifting doors can resist strong winds. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.

4. Good sound insulation and noise reduction

It forms an effective obstacle to sound transmission, and whether it is industrial noise or external noise, it can greatly reduce the volume introduced into the room.

5. sturdy and durable

It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.

Vertical folding Sectional Door

6、How much is the Vertical folding Sectional Door ?

The Vertical folding Sectional Door price is introduced as follows:

1. Brand strength

At present, there are various brands of Vertical folding Sectional Door in Jiangsu(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Vertical folding Sectional Door are different.

2. Sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

3. Model specification

The quotation of the same series of Vertical folding Sectional Door with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, Anbixin Vertical folding Sectional Door manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Vertical folding Sectional Door price can meet the purchasing needs of customers.

5. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Vertical folding Sectional Door

Vertical folding Sectional Door the product looks beautiful.，is a common Vertical folding Sectional Door ，at work,Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during the opening and closing process, reduce the load of the motor, and ensure that the door can be stably stopped at any position.。