What is a Vertical lifting Sectional Door? Introduction to the advantages and characteristics of the Sectional Door

Vertical lifting Sectional Door Also known as industrial sliding doors, vertical lift door or electric lift door.。

1、Brief introduction of Vertical lifting Sectional Door

Vertical lifting Sectional Door It is a kind of door equipment used for entrances and exits of industrial places, which is mainly used to realize rapid opening and closing and isolation of entrances and exits of industrial workshops, warehouses and other places.，is a Vertical lifting Sectional Door ，generally, it is composed of Door panel structure, control system, Track device, Drive system, security apparatus/device/equipment and other major components，This Vertical lifting Sectional Door The overall structural design is relatively simple，it has the characteristics of Excellent sealing performance, Flexible installation mode, The material is sturdy and durable., Tightly sealed and dustproof and Various control methods，it has the functions of Flexible opening and closing, Intelligent control, Safety protection, Efficient heat preservation and Sealing and dustproof。

Vertical lifting Sectional Door

2、Introduction of advantages of Vertical lifting Sectional Door

Vertical lifting Sectional Door s have the following advantages.

1. Excellent thermal insulation

Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.

2. Safe and reliable

Equipped with multiple safety devices such as anti-falling and infrared induction, it runs smoothly and ensures the safety of personnel and goods.

3. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

4. Good sound insulation and noise reduction

It forms an effective obstacle to sound transmission, and whether it is industrial noise or external noise, it can greatly reduce the volume introduced into the room.

5. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

Vertical lifting Sectional Door

3、Structural characteristics of Vertical lifting Sectional Door

The Vertical lifting Sectional Door has the following structure

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

5. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

Vertical lifting Sectional Door

4、Introduction of Vertical lifting Sectional Door characteristics

Vertical lifting Sectional Door has the following characteristics

1. Efficient heat preservation and energy saving

Effectively reduce heat loss and save energy consumption.

2. Strong, wind-resistant and stable

Reasonable structural design, resistant to strong winds.

3. Beautiful and generous appearance

Simple modeling, enhance the architectural image

4. Flexible and diverse control

A variety of operation modes, convenient to use.

5. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

Vertical lifting Sectional Door

5、Vertical lifting Sectional Door principle

The principle of Vertical lifting Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

4. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Vertical lifting Sectional Door

6、Why choose Anbixin door industry?

Choosing a suitable Vertical lifting Sectional Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Vertical lifting Sectional Door products that meet the demand and have good cost performance.。

Anbixin

Vertical lifting Sectional Door Also called industrial lifting door, it is a door device with vertical lifting function.，multifunctional, with functions such as Flexible opening and closing, Intelligent control, attractive and durable, smooth running and Efficient heat preservation。