Introduction to Electronic Clean Workshop Fast Door , PVC FAST Door advantages, characteristics and principles

Electronic Clean Workshop Fast Door It is a kind of high-speed automatic door equipment suitable for industrial places, mainly used in industrial workshops, logistics channels and other areas to realize rapid opening and closing, effectively isolate the space and reduce heat exchange and dust entry.，Structure consists of driving gear, Door curtain material, Track structure, Induction system, safety devices/installations and so on，This Electronic Clean Workshop Fast Door The structural design is more advanced and reasonable.，features include Thermal insulation, Low noise operation, High speed operation, Simple and generous appearance and High-speed agile opening，is developed and improved by Anbixin。

1、Brief introduction of Electronic Clean Workshop Fast Door

Electronic Clean Workshop Fast Door Also called quick shutter door, it is a high-speed door body with soft curtain as the main body.，support customization。

Electronic Clean Workshop Fast Door

2、Electronic Clean Workshop Fast Door application

Electronic Clean Workshop Fast Door s have the following purposes.

1. Light industrial processing place

Flexible installation and low noise operation do not affect the production and operation of light industry and improve the traffic efficiency of places.

2. Food packaging area

Intelligent induction quick switch reduces the waiting time of personnel, seals against dust and insects, and ensures the hygiene of food packaging.

3. Commercial store entrance

The appearance is simple and beautiful, and the quick switch is convenient for customers to enter and leave, which saves energy and reduces the cost of air conditioning in the shop.

4. Chemical production workshop

Soft material with acid and alkali resistance and corrosion resistance, suitable for special environment of chemical workshop to prevent chemical corrosion.

5. Electronic cleaning workshop

Quickly isolate external pollution, maintain the cleanliness of the workshop, and meet the high requirements of electronic components production on the environment.

Electronic Clean Workshop Fast Door

3、Working principle of Electronic Clean Workshop Fast Door

The Electronic Clean Workshop Fast Door has the following principles.

1. Induction opening

Equipped with a variety of sensing devices, such as infrared sensing, radar sensing, geomagnetic sensing, etc. When someone or an object approaches, the sensing device will send a signal to the control system, and the control system will drive the motor to open the door curtain after receiving the signal, so as to realize the automatic opening function and facilitate the rapid passage of people and goods.

2. Induction trigger

Infrared induction, radar induction, geomagnetic induction and other devices are installed around the door body. When people or objects enter the induction area, the induction devices transmit signals to the control system. After receiving the signal, the control system immediately sends out an instruction to start the motor and quickly open the door curtain to realize automatic induction traffic.

3. Winding opening and closing

The special motor drives the reel to rotate, and the soft PVC or polyester fiber door curtain is wound on the reel to realize opening; When the motor rotates reversely, the door curtain falls down and closes smoothly along the track by its own gravity and the retracting and retracting action of the reel. The vertical speed and stroke of the door curtain can be adjusted by controlling the forward and reverse rotation and rotation speed of the motor.

4. Door curtain winding

The door curtain is usually made of high-strength soft materials such as PVC or polyester fiber. The door curtain is wound or unfolded on the reel driven by a motor to realize the opening and closing of the door. Because the door curtain is soft, the winding process can be completed quickly, which improves the running speed of the door.

5. Sealing and dustproof

The edge of door curtain is usually designed with special sealing structure, such as brush seal, rubber strip seal, etc. When the door is closed, these sealing structures can be closely attached to the door frame, effectively preventing the exchange of dust, mosquitoes, cold and hot air, etc., playing a good sealing role and maintaining the stability of the indoor environment.

Electronic Clean Workshop Fast Door

4、Introduction of Electronic Clean Workshop Fast Door characteristics

Electronic Clean Workshop Fast Door has the following characteristics

1. Intelligent induction control

Automatic induction, no need for manual operation.

2. Simple and quick installation

Quick installation, saving time and effort.

3. Simple and generous appearance

Simple design, visual comfort

4. Low noise and quiet operation

Run quietly and reduce interference.

5. Energy-saving thermal insulation

Reduce energy consumption and stabilize room temperature.

Electronic Clean Workshop Fast Door

5、Structural characteristics of Electronic Clean Workshop Fast Door

The Electronic Clean Workshop Fast Door has the following structure

1. Track design

The nylon brushes are installed in the aluminum alloy tracks on both sides, which not only reduces the friction between the door curtain and the track, but also plays a role in sealing and dustproof, ensuring smooth operation.

2. Drive assembly

Special shutter motor is equipped with reel, and some parts are equipped with servo control system, which realizes high-speed winding and precise control of door curtain and ensures rapid opening and closing.

3. Induction system

Equipped with infrared induction, radar induction, geomagnetic induction and other devices, real-time monitoring of the surrounding environment, automatically trigger the door curtain to open, improve traffic efficiency.

4. safety devices

It is equipped with infrared photoelectric induction protection and a safe bottom edge (rebound when touching the bottom) to prevent people from being caught and objects from being caught, so as to provide safety guarantee for people and goods to enter and leave.

5. Door curtain material

High-strength polyester fiber industrial base cloth or high-quality PVC material is selected, with thin thickness and specially treated surface, which has the characteristics of wear resistance, tear resistance, waterproof and corrosion resistance.

Electronic Clean Workshop Fast Door

6、Brief introduction of Electronic Clean Workshop Fast Door

Electronic Clean Workshop Fast Door It is a kind of high-speed automatic door equipment suitable for industrial places.，it can be used in food, business, light industry, electron, business and other industries，Widely used in Commercial store entrance, Electronic cleaning workshop, Food packaging area, Commercial store entrance and Chemical production workshop，the product looks atmospheric.，customizable。

Electronic Clean Workshop Fast Door

Electronic Clean Workshop Fast Door it has the characteristics of Good sealing and dustproof, Excellent material, Easy maintenance, Flexible custom size and High speed operation，It has a wide range of uses, including Commercial store entrance, Light industrial processing place, Electronic cleaning workshop, Food packaging area and Chemical production workshop。