Introduction to Aluminum alloy heavy-duty Sectional Door and Sectional Door working principle

Aluminum alloy heavy-duty Sectional Door It is a kind of door equipment used for the entrance and exit of industrial places.。The following is to introduce the Aluminum alloy heavy-duty Sectional Door :

1、Brief introduction of Aluminum alloy heavy-duty Sectional Door

Aluminum alloy heavy-duty Sectional Door Also known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，is a kind of Aluminum alloy heavy-duty Sectional Door manufactured by Anbixin。

Aluminum alloy heavy-duty Sectional Door

2、Working principle of Aluminum alloy heavy-duty Sectional Door

The Aluminum alloy heavy-duty Sectional Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

4. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

5. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

Aluminum alloy heavy-duty Sectional Door

3、Introduction of Aluminum alloy heavy-duty Sectional Door characteristics

Aluminum alloy heavy-duty Sectional Door has the following characteristics

1. Flexible and diverse control

A variety of operation modes, convenient to use.

2. Flexible installation mode

Adapt to different scenes, convenient installation.

3. Efficient heat preservation and energy saving

Effectively reduce heat loss and save energy consumption.

4. Strong, wind-resistant and stable

Reasonable structural design, resistant to strong winds.

5. Excellent sound insulation and noise reduction

Block external noise and create a quiet space.

Aluminum alloy heavy-duty Sectional Door

4、Aluminum alloy heavy-duty Sectional Door application

Aluminum alloy heavy-duty Sectional Door s have the following purposes.

1. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

2. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

3. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

4. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

5. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

Aluminum alloy heavy-duty Sectional Door

5、Structural advantages of Aluminum alloy heavy-duty Sectional Door

The Aluminum alloy heavy-duty Sectional Door has the following structure

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

3. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

4. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

5. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

Aluminum alloy heavy-duty Sectional Door

6、Brief introduction of Aluminum alloy heavy-duty Sectional Door

Aluminum alloy heavy-duty Sectional Door Also known as industrial sliding doors, vertical lift door or electric lift door.。

Aluminum alloy heavy-duty Sectional Door

Aluminum alloy heavy-duty Sectional Door Structure consists of control system, Track device, security apparatus/device/equipment, Drive system, Door panel structure and so on，the advantage is A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.。