What is a Workshop industrial Sectional Door? Introduction to the Working Principle of Sectional Door

Workshop industrial Sectional Door Also known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，the product looks atmospheric.，multifunctional, with functions such as attractive and durable, Safety protection, Wind resistance and stability, Sealing and dustproof and Flexible opening and closing，is based on Anbixin is a Workshop industrial Sectional Door newly developed by Anbixin door industry。

1、Brief introduction of Workshop industrial Sectional Door

Workshop industrial Sectional Door It is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.。

Workshop industrial Sectional Door

2、Workshop industrial Sectional Door application

Workshop industrial Sectional Door s have the following purposes.

1. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

2. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

3. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

4. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

5. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

Workshop industrial Sectional Door

3、Workshop industrial Sectional Door function

Workshop industrial Sectional Door it has the functions of Wind resistance and stability, Flexible opening and closing, Sound insulation and noise reduction, Safety protection and sturdy and durable，the product looks beautiful.，it is an ideal choice for customers to buy Workshop industrial Sectional Door 。

Workshop industrial Sectional Door

4、Introduction of advantages of Workshop industrial Sectional Door

Workshop industrial Sectional Door s have the following advantages.

1. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

2. Complete security guarantee

Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.

3. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

4. Excellent thermal insulation

Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.

5. Safe and reliable

Equipped with multiple safety devices such as anti-falling and infrared induction, it runs smoothly and ensures the safety of personnel and goods.

Workshop industrial Sectional Door

5、Workshop industrial Sectional Door principle

The principle of Workshop industrial Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

3. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

4. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

5. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

Workshop industrial Sectional Door

6、Workshop industrial Sectional Door function

Workshop industrial Sectional Door multifunctional, with functions such as attractive and durable, smooth running, Efficient heat preservation, Sealing and dustproof and Intelligent control，features include Good sound insulation and noise reduction, Efficient heat preservation, Tightly sealed and dustproof, Complete security guarantee and Run smoothly and smoothly，Also called industrial lifting door, it is a door device with vertical lifting function.，be loved by our customers.。

Workshop industrial Sectional Door

Workshop industrial Sectional Door the advantage is Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.、The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.，is a kind of high quality and low price Workshop industrial Sectional Door 。