Introduction to Workshop industrial Sectional Door, advantages, characteristics and principles of Sectional Door

Workshop industrial Sectional Door Also known as industrial sliding doors, vertical lift door or electric lift door.，is a Workshop industrial Sectional Door ，features include sturdy and durable, Beautiful appearance design, Run smoothly and smoothly, Strong wind resistance and Flexible installation。

1、Brief introduction of Workshop industrial Sectional Door

Workshop industrial Sectional Door It is an industrial door device with high efficiency and quick opening and closing.。

Workshop industrial Sectional Door

2、Working principle of Workshop industrial Sectional Door

The Workshop industrial Sectional Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

5. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

Workshop industrial Sectional Door

3、Functional advantages of Workshop industrial Sectional Door

Workshop industrial Sectional Door s have the following advantages.

1. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

2. Strong wind resistance

The structural design is reasonable, and some lifting doors can resist strong winds. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.

3. Safe and reliable

Equipped with multiple safety devices such as anti-falling and infrared induction, it runs smoothly and ensures the safety of personnel and goods.

4. The material is sturdy and durable.

Door panels are usually made of double-sided color steel plates filled with polyurethane to ensure long-term use.

5. Flexible and convenient installation

There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.

Workshop industrial Sectional Door

4、Structural advantages of Workshop industrial Sectional Door

The Workshop industrial Sectional Door has the following structure

1. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

2. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

3. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

4. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

5. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

Workshop industrial Sectional Door

5、Workshop industrial Sectional Door price concessions

The Workshop industrial Sectional Door price is introduced as follows:

1. market demand

With the increasingly fierce competition of Workshop industrial Sectional Door , market factors have a certain influence on the price of Workshop industrial Sectional Door . When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

2. Brand strength

At present, there are various brands of Workshop industrial Sectional Door in Jiangsu(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Workshop industrial Sectional Door are different.

3. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. quality factor

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Workshop industrial Sectional Door will vary greatly. Anbixin door industry attaches great importance to the quality of products, and the formulation of prices is also reasonable.

5. Manufacturer's strength

Anbixin is a self-produced and self-sold Workshop industrial Sectional Door , and has rich experience in the production and manufacturing of Workshop industrial Sectional Door . In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

Workshop industrial Sectional Door

6、Anbixin door industry's after-sales service

The stable development of a manufacturer depends not only on product quality, but also on after-sales. Therefore, besides paying attention to product quality and price, the after-sales service of the manufacturer also plays a very important role in the future product application. Anbixin provides "housekeeping" after-sales service, which is more intimate.。

Anbixin door industry

Workshop industrial Sectional Door multifunctional, with functions such as Flexible opening and closing, smooth running, attractive and durable, Efficient heat preservation and Wind resistance and stability，the advantage is A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.。