Introduction to Electric insulated integral Sectional Door, introduction to Sectional Door advantages and characteristics

Electric insulated integral Sectional Door It is a kind of door equipment used for the entrance and exit of industrial places.，multifunctional, with functions such as Intelligent control, Flexible opening and closing, Sound insulation and noise reduction, attractive and durable and Safety protection，the advantage is It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.、Equipped with multiple safety devices, such as anti-falling, infrared sensing, etc., it runs smoothly and ensures the safety of personnel and goods.、Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.，it is an ideal choice for customers to buy Electric insulated integral Sectional Door 。

1、Brief introduction of Electric insulated integral Sectional Door

Electric insulated integral Sectional Door It is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.，Mainly used forAutomobile manufacturing workshop,Cold chain storage place,Logistics distribution center,Industrial workshop warehouse andAircraft maintenance depot，has been favored by more and more customers.。

Electric insulated integral Sectional Door

2、Structural advantages of Electric insulated integral Sectional Door

The Electric insulated integral Sectional Door has the following structure

1. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

2. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

5. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

Electric insulated integral Sectional Door

3、Electric insulated integral Sectional Door function

Electric insulated integral Sectional Door it has the functions of Wind resistance and stability, Sealing and dustproof, smooth running, sturdy and durable and Efficient heat preservation，It is an industrial door device with high efficiency and quick opening and closing.，in the course of work,The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When the door is closed, the door panel is slowly lowered by the reverse rotation of the motor.，customizable。

Electric insulated integral Sectional Door

4、Advantages of Electric insulated integral Sectional Door principle

The principle of Electric insulated integral Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

3. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Guide rail guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

Electric insulated integral Sectional Door

5、Electric insulated integral Sectional Door video

Anbixin provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Electric insulated integral Sectional Door production process and production site, and gain favorable comments and recognition from customers.。

Electric insulated integral Sectional Door

As you can see from the live video.，Jiangsu anbixin internet of things technology co., ltd A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.。

6、Real-time shooting in Anbixin door industry's production workshop

The finished products of the Electric insulated integral Sectional Door factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Anbixin

The finished products of the Electric insulated integral Sectional Door factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Electric insulated integral Sectional Door The structural design is more advanced and reasonable.，Structure consists of Door panel structure, control system, security apparatus/device/equipment, Drive system, Track device and so on，Commonly used inLogistics distribution center,Aircraft maintenance depot,Cold chain storage place,Industrial workshop warehouse,Automobile manufacturing workshop and so on。