Introduction to Industrial electric Sectional Door, Sectional Door advantages, characteristics and principles

Industrial electric Sectional Door It is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.，Simple structure and advanced technology.，the main structure includes security apparatus/device/equipment, Drive system, Track device, control system, Door panel structure and so on。The following is to introduce the Industrial electric Sectional Door :

1、Brief introduction of Industrial electric Sectional Door

Industrial electric Sectional Door Also known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，it has the characteristics of Flexible installation, Flexible and diverse control, Flexible and convenient installation, Smooth and quiet operation and Run smoothly and smoothly，It can be used for Logistics distribution center, Automobile manufacturing workshop, Aircraft maintenance depot, Automobile manufacturing workshop, Logistics distribution center, Industrial workshop warehouse and so on。

Industrial electric Sectional Door

2、Industrial electric Sectional Door performance advantage

The advantages of Industrial electric Sectional Door are as follows:

1. Complete security guarantee

Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.

2. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

3. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

4. Strong wind resistance

The structural design is reasonable, and some lifting doors can resist strong winds. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.

5. Flexible and convenient installation

There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.

Industrial electric Sectional Door

3、Industrial electric Sectional Door use

The purpose of Industrial electric Sectional Door is introduced as follows:

1. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

2. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

3. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

4. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

5. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

Industrial electric Sectional Door

4、Industrial electric Sectional Door principle

The principle of Industrial electric Sectional Door is introduced as follows:

1. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

2. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

3. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

4. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial electric Sectional Door

5、Industrial electric Sectional Door characteristics

The Industrial electric Sectional Door features are as follows:

1. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

2. Tightly sealed and dustproof

Prevent dust and sundries from entering the room.

3. Efficient heat preservation and energy saving

Effectively reduce heat loss and save energy consumption.

4. Thick, strong and durable

Made of high-quality materials, durable and not easy to damage.

5. Flexible and diverse control

A variety of operation modes, convenient to use.

Industrial electric Sectional Door

6、Introduction of Anbixin door industry Company

Anbixin is a professional manufacturer of {产品系列}, which produces Industrial electric Sectional Door with the advantage is It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

Anbixin door industry

Industrial electric Sectional Door It has a wide range of uses, and is often used inCold chain storage place,Industrial workshop warehouse,Aircraft maintenance depot,Logistics distribution center,Automobile manufacturing workshop and so on，is a popular Industrial electric Sectional Door 。