Introduction to Workshop insulated Vertical Lift Door and Vertical Lift Door working principle

Workshop insulated Vertical Lift Door It is a kind of door equipment used for the entrance and exit of industrial places.，it is an ideal choice for customers to buy Workshop insulated Vertical Lift Door 。

1、Brief introduction of Workshop insulated Vertical Lift Door

Workshop insulated Vertical Lift Door It is an industrial door device with high efficiency and quick opening and closing.，it can be used in aviation, industry, automobile, logistics, cold chain and other industries。

Workshop insulated Vertical Lift Door

2、Introduction of Workshop insulated Vertical Lift Door characteristics

Workshop insulated Vertical Lift Door has the following characteristics

1. Strong, wind-resistant and stable

Reasonable structural design, resistant to strong winds.

2. Tightly sealed and dustproof

Prevent dust and sundries from entering the room.

3. Thick, strong and durable

Made of high-quality materials, durable and not easy to damage.

4. Beautiful and generous appearance

Simple modeling, enhance the architectural image

5. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

Workshop insulated Vertical Lift Door

3、Structural advantages of Workshop insulated Vertical Lift Door

The Workshop insulated Vertical Lift Door has the following structure

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

5. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

Workshop insulated Vertical Lift Door

4、Advantages of Workshop insulated Vertical Lift Door principle

The Workshop insulated Vertical Lift Door has the following principles.

1. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Workshop insulated Vertical Lift Door

5、Workshop insulated Vertical Lift Door function

Workshop insulated Vertical Lift Door multifunctional, with functions such as smooth running, sturdy and durable, attractive and durable, Sound insulation and noise reduction and Safety protection，It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.，it has the characteristics of Excellent sound insulation and noise reduction, Run smoothly and smoothly, Strong, wind-resistant and stable, Smooth and quiet operation and Flexible installation，It has the functions of Aircraft maintenance depot, Automobile manufacturing workshop, Industrial workshop warehouse, Logistics distribution center and Cold chain storage place，The price is relatively low.，modern technology。

Workshop insulated Vertical Lift Door

6、Workshop insulated Vertical Lift Door performance advantage

Workshop insulated Vertical Lift Door s have the following advantages.

1. Good sound insulation and noise reduction

It forms an effective obstacle to sound transmission, and whether it is industrial noise or external noise, it can greatly reduce the volume introduced into the room.

2. sturdy and durable

It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.

3. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

4. The material is sturdy and durable.

Door panels are usually made of double-sided color steel plates filled with polyurethane to ensure long-term use.

5. Complete security guarantee

Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.

Workshop insulated Vertical Lift Door

Workshop insulated Vertical Lift Door Excellent sealing performance,sturdy and durable,Excellent thermal insulation,Efficient heat preservation,Multiple safety protection，the principle is simple.Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during the opening and closing process, reduce the load of the motor, and ensure that the door can be stably stopped at any position.。