Introduction to Heavy-duty Garage Door, Garage Door specifications, model parameters

Heavy-duty Garage Door Also known as industrial sliding doors, vertical lift door or electric lift door.，it has the functions of Sealing and dustproof, sturdy and durable, Intelligent control, Safety protection and smooth running，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of control system, Door panel structure, security apparatus/device/equipment, Track device and Drive system，the product looks beautiful.，is a kind of Heavy-duty Garage Door manufactured by Anbixin door industry。The following is to introduce the Heavy-duty Garage Door :

1、Brief introduction of Heavy-duty Garage Door

Heavy-duty Garage Door As an efficient and practical industrial door equipment，It can be used for Aircraft maintenance depot, Industrial workshop warehouse, Automobile manufacturing workshop, Logistics distribution center, Automobile manufacturing workshop, Cold chain storage place and so on，The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When the door is closed, the door panel is slowly lowered by the reverse rotation of the motor.。

Heavy-duty Garage Door

2、Advantages of Heavy-duty Garage Door principle

The principle of Heavy-duty Garage Door is introduced as follows:

1. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

4. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Heavy-duty Garage Door

3、Structural advantages of Heavy-duty Garage Door

The Heavy-duty Garage Door structure is introduced as follows:

1. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

2. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

3. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

4. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

5. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

Heavy-duty Garage Door

4、Heavy-duty Garage Door characteristics

The Heavy-duty Garage Door features are as follows:

1. Strong, wind-resistant and stable

Reasonable structural design, resistant to strong winds.

2. Tightly sealed and dustproof

Prevent dust and sundries from entering the room.

3. Smooth and quiet operation

Low noise during operation and comfortable experience.

4. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

5. Flexible installation mode

Adapt to different scenes, convenient installation.

Heavy-duty Garage Door

5、Working principle of Heavy-duty Garage Door

The Heavy-duty Garage Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

Heavy-duty Garage Door

Heavy-duty Garage Door the main structure includes Track device, security apparatus/device/equipment, control system, Drive system and Door panel structure，This Heavy-duty Garage Door The overall structural design is simple, diverse and beautiful.，the advantage is Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.，it has the functions of smooth running, Intelligent control, sturdy and durable, Flexible opening and closing and Safety protection。