What is a Workshop door Garage Door? Introduction to the advantages and characteristics of the Garage Door

Workshop door Garage Door It is an industrial door device with high efficiency and quick opening and closing.，the product looks atmospheric.，The structural design is more advanced and reasonable.，it has the structure of security apparatus/device/equipment, Door panel structure, Track device, Drive system and control system，the advantage is Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.，It has a wide range of uses, including Cold chain storage place, Industrial workshop warehouse, Aircraft maintenance depot, Industrial workshop warehouse and Cold chain storage place。

1、Brief introduction of Workshop door Garage Door

Workshop door Garage Door It is a kind of door equipment used for the entrance and exit of industrial places.，widely used inlogistics,automobile,aviation,industry,logistics and other industries，it has the characteristics of Strong, wind-resistant and stable, Good sound insulation and noise reduction, Efficient heat preservation, Complete security guarantee and Smooth and quiet operation。

Workshop door Garage Door

2、Workshop door Garage Door use

The purpose of Workshop door Garage Door is introduced as follows:

1. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

2. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

3. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

4. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

5. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

Workshop door Garage Door

3、Working principle of Workshop door Garage Door

The principle of Workshop door Garage Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

3. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

Workshop door Garage Door

4、Workshop door Garage Door advantage

The advantages of Workshop door Garage Door are as follows:

1. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

2. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

3. Excellent thermal insulation

Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.

4. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

5. The material is sturdy and durable.

Door panels are usually made of double-sided color steel plates filled with polyurethane to ensure long-term use.

Workshop door Garage Door

5、Workshop door Garage Door function

Workshop door Garage Door it has the functions of Sound insulation and noise reduction, Efficient heat preservation, Safety protection, smooth running and Intelligent control，the product looks beautiful.，It is mostly used in Logistics distribution center, Automobile manufacturing workshop, Logistics distribution center, Industrial workshop warehouse, Automobile manufacturing workshop, Aircraft maintenance depot and so on，it is an ideal choice for customers to buy Workshop door Garage Door 。

Workshop door Garage Door

6、How to choose the right product manufacturer?

Choosing a suitable Workshop door Garage Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Workshop door Garage Door products that meet the demand and have good cost performance.。

Anbixin door industry

Workshop door Garage Door features include Various control methods, Thick, strong and durable, Strong wind resistance, Flexible installation mode and Excellent sealing performance，is a common Workshop door Garage Door 。