What is a Steel Industrial Spiral Door? Introduction to the principle of High speed Spiral Door structure

Steel Industrial Spiral DoorIt is a high-performance industrial rapid door opening and closing equipment.，be of high quality，The price is more affordable。

1、Brief introduction of Steel Industrial Spiral Door

Steel Industrial Spiral DoorAlso known as hard turbine door, industrial hard speed door or turbine lifting speed door.，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of High-end automobile production line, New energy battery factory building, Cold storage area, Medical aseptic workshop and Airport freight passage，is a popular Steel Industrial Spiral Door。

Steel Industrial Spiral Door

2、Steel Industrial Spiral Door principle

The principle of Steel Industrial Spiral Door is introduced as follows:

1. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

2. Turbine orbit

The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more smoothly, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.

3. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

4. Fast drive

Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops. ?

5. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

Steel Industrial Spiral Door

3、Steel Industrial Spiral Door performance advantage

Steel Industrial Spiral Doors have the following advantages.

1. Low noise and quiet operation

The polyurethane guide wheel slides in the aluminum alloy track, which has low noise during operation, creates a relatively quiet environment for workshops, warehouses and other working areas, and reduces noise interference.

2. Good thermal insulation

The interior is filled with polyurethane foam material, and the broken bridge design blocks indoor and outdoor heat conduction, effectively maintaining indoor temperature stability, reducing energy consumption of air conditioning and heating, and achieving remarkable energy saving effect in cold storage and constant temperature workshop.

3. Adapt to complex environment

No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.

4. Multiple safety protection

Double light curtain induction and emergency stop device are standard, which can respond quickly when encountering obstacles; Some products are also equipped with airbags, wire rope breakage protection, etc., to ensure the safety of personnel and goods in all directions.

5. Rugged, durable and reliable

The door body is made of double-layer stretched aluminum plate, which is much stronger than ordinary color steel plate. Equipped with turbine track system, it runs smoothly, and the door panels do not touch each other when rolled up, which greatly reduces wear and deformation, has low annual maintenance cost and stable long-term use performance.

Steel Industrial Spiral Door

4、Steel Industrial Spiral Door application

Steel Industrial Spiral Doors have the following purposes.

1. New energy battery factory building

Stable wind resistance, sealing and dust isolation, providing a stable environment for the production of new energy batteries and ensuring product quality.

2. Airport freight passage

Resist bad weather such as strong wind, pass quickly and efficiently, and meet the frequent transportation needs of airport freight.

3. Cold storage area

Good thermal insulation performance, reducing cold loss, fast opening and closing to reduce cold loss when opening the door, saving energy.

4. Medical aseptic workshop

Tightly sealed and insulated, to prevent air convection pollution, to maintain a sterile environment in the workshop, in line with pharmaceutical production standards.

5. High-end automobile production line

Ultra-high-speed opening and closing match the rhythm of automobile production, which is firm and impact-resistant, ensuring the efficient operation of the production line.

Steel Industrial Spiral Door

5、Structural advantages of Steel Industrial Spiral Door

The Steel Industrial Spiral Door has the following structure

1. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

2. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

3. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

4. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

5. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

Steel Industrial Spiral Door

6、Steel Industrial Spiral Door characteristics

The Steel Industrial Spiral Door features are as follows:

1. Multiple security guarantees

A variety of protection, safe and worry-free

2. Fashion, beauty and atmosphere

Design, enhance the style.

3. Tightly sealed and insulated

Reduce heat loss, save energy and protect environment.

4. Flexible adaptation scenario

Suitable for various industrial environments.

5. Rugged and durable.

Hard material, durable

Steel Industrial Spiral Door

Steel Industrial Spiral Dooris a Steel Industrial Spiral Door，multifunctional, with functions such as sturdy and durable, Wind resistance and stability, Intelligent control, Sound insulation and noise reduction and Efficient heat preservation。