Introduction to Workshop Full-Automatic Spiral Door, advantages, characteristics and principles of High speed Spiral Door

Workshop Full-Automatic Spiral DoorAlso called hard quick shutter door, it is a kind of high-speed door body with hard aluminum alloy door panel as the main body.。The following is to introduce the Workshop Full-Automatic Spiral Door:

1、Brief introduction of Workshop Full-Automatic Spiral Door

Workshop Full-Automatic Spiral DoorAs an efficient and durable industrial door equipment.，the principle is simple.EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.，is a popular Workshop Full-Automatic Spiral Door。

Workshop Full-Automatic Spiral Door

2、Physical picture of Workshop Full-Automatic Spiral Door

Overview of high-definition pictures,the product looks atmospheric., different specifications and models。

Workshop Full-Automatic Spiral Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

3、Workshop Full-Automatic Spiral Door working site

Anbixin provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Workshop Full-Automatic Spiral Doort operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Workshop Full-Automatic Spiral Door

As you can see from the live video.，Anbixin at work,Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops.。

4、Workshop Full-Automatic Spiral Door performance advantage

The advantages of Workshop Full-Automatic Spiral Door are as follows:

1. Low noise and quiet operation

The polyurethane guide wheel slides in the aluminum alloy track, which has low noise during operation, creates a relatively quiet environment for workshops, warehouses and other working areas, and reduces noise interference.

2. Modern and beautiful appearance

The door body has various colors, besides the primary colors of aluminum alloy, it can also be customized in colors such as sky blue, pearl white, China red, etc. The surface is pressed with stripes, which is simple and generous, and can enhance the overall image of the building and adapt to various architectural styles.

3. Rugged, durable and reliable

The door body is made of double-layer stretched aluminum plate, which is much stronger than ordinary color steel plate. Equipped with turbine track system, it runs smoothly, and the door panels do not touch each other when rolled up, which greatly reduces wear and deformation, has low annual maintenance cost and stable long-term use performance.

4. Adapt to complex environment

No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.

5. Quick opening and closing

Ultra-high-speed opening and closing, meeting the requirements of high frequency and high efficiency, and improving work efficiency.

Workshop Full-Automatic Spiral Door

5、Workshop Full-Automatic Spiral Door principle

The principle of Workshop Full-Automatic Spiral Door is introduced as follows:

1. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

2. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

3. Turbine guide

Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.

4. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

5. Turbine orbit

The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more smoothly, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.

Workshop Full-Automatic Spiral Door

6、Workshop Full-Automatic Spiral Door price advantage

The Workshop Full-Automatic Spiral Door price is introduced as follows:

1. specifications and models

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

2. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

3. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. Less intermediate links

Anbixin door industry has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Workshop Full-Automatic Spiral Door

Workshop Full-Automatic Spiral Doormultifunctional, with functions such as attractive and durable, Safety protection, Sealing and dustproof, sturdy and durable and Intelligent control，It has the functions of Airport freight passage, Airport freight passage, Cold storage area, High-end automobile production line and Medical aseptic workshop，It is a professional industrial door equipment with high wind resistance, high sealing and long service life, which adopts cemented carbide door panel and turbine drive technology.。