Introduction to Automatic Repair Zipper Spiral Door, High speed Spiral Door advantages, characteristics and principles

Automatic Repair Zipper Spiral DoorIt is a kind of high-performance industrial rapid door opening and closing equipment, which is mainly used in industrial workshops, warehousing and logistics places, and can realize rapid opening and closing, effectively isolate the space, prevent dust and keep warm.，at work,The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more stably, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.，is a kind of Automatic Repair Zipper Spiral Door manufactured by Anbixin door industry。The following is to introduce the Automatic Repair Zipper Spiral Door:

1、Brief introduction of Automatic Repair Zipper Spiral Door

Automatic Repair Zipper Spiral DoorAlso known as hard turbine door, industrial hard speed door or turbine lifting speed door, it is an automatic door body driven by motor, driven by turbine reel to quickly lift the hard door panel, and guided by unique track structure.，be of high quality。

Automatic Repair Zipper Spiral Door

2、Introduction of advantages of Automatic Repair Zipper Spiral Door

Automatic Repair Zipper Spiral Doors have the following advantages.

1. Adapt to complex environment

No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.

2. Good wind resistance

It can resist strong wind, and the special structure and material selection make the door body stable in bad weather. It is suitable for factories, warehouses and other places with high requirements for building protection in coastal areas.

3. Multiple safety protection

Double light curtain induction and emergency stop device are standard, which can respond quickly when encountering obstacles; Some products are also equipped with airbags, wire rope breakage protection, etc., to ensure the safety of personnel and goods in all directions.

4. Quick opening and closing

Ultra-high-speed opening and closing, meeting the requirements of high frequency and high efficiency, and improving work efficiency.

5. Low noise and quiet operation

The polyurethane guide wheel slides in the aluminum alloy track, which has low noise during operation, creates a relatively quiet environment for workshops, warehouses and other working areas, and reduces noise interference.

Automatic Repair Zipper Spiral Door

3、Automatic Repair Zipper Spiral Door application

Automatic Repair Zipper Spiral Doors have the following purposes.

1. Cold storage area

Good thermal insulation performance, reducing cold loss, fast opening and closing to reduce cold loss when opening the door, saving energy.

2. Medical aseptic workshop

Tightly sealed and insulated, to prevent air convection pollution, to maintain a sterile environment in the workshop, in line with pharmaceutical production standards.

3. New energy battery factory building

Stable wind resistance, sealing and dust isolation, providing a stable environment for the production of new energy batteries and ensuring product quality.

4. Airport freight passage

Resist bad weather such as strong wind, pass quickly and efficiently, and meet the frequent transportation needs of airport freight.

5. High-end automobile production line

Ultra-high-speed opening and closing match the rhythm of automobile production, which is firm and impact-resistant, ensuring the efficient operation of the production line.

Automatic Repair Zipper Spiral Door

4、Working principle of Automatic Repair Zipper Spiral Door

The Automatic Repair Zipper Spiral Door has the following principles.

1. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

2. Fast drive

Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops. ?

3. Turbine orbit

The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more smoothly, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.

4. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

5. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

Automatic Repair Zipper Spiral Door

5、Automatic Repair Zipper Spiral Door function

Automatic Repair Zipper Spiral Doorit has the functions of sturdy and durable, Flexible opening and closing, Safety protection, Efficient heat preservation and Sound insulation and noise reduction，Commonly used inHigh-end automobile production line,Airport freight passage,Medical aseptic workshop,New energy battery factory building,Cold storage area and so on。

Automatic Repair Zipper Spiral Door

6、Structural characteristics of Automatic Repair Zipper Spiral Door

The Automatic Repair Zipper Spiral Door structure is introduced as follows:

1. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

2. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

3. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

4. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

5. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

Automatic Repair Zipper Spiral Door

Automatic Repair Zipper Spiral Doorit is widely used in automobile, new energy, medicine, airport, new energy and other industries，it is mainly composed of Medical aseptic workshop, High-end automobile production line, Airport freight passage, Cold storage area and New energy battery factory building，productThe overall structural design is relatively simple and compact.，the advantage is High-speed opening and closing, meeting the requirements of high frequency and high efficiency, and improving work efficiency.、No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably, with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.、High-strength aluminum alloy door panels with turbine track system have good wind resistance and can resist strong winds.、The door panels and edges are tightly sealed, and the interior is filled with high-quality thermal insulation materials, effectively isolating heat and noise.、High-speed opening and closing, meeting the requirements of high frequency and high efficiency, and improving work efficiency.。