Introduction to Electronic Factory Dust-Proof Clean Spiral Door and High speed Spiral Door structure principle

Electronic Factory Dust-Proof Clean Spiral DoorAs an efficient and durable industrial door equipment.，is a common Electronic Factory Dust-Proof Clean Spiral Door。

1、Brief introduction of Electronic Factory Dust-Proof Clean Spiral Door

Electronic Factory Dust-Proof Clean Spiral DoorAlso known as hard turbine door, industrial hard speed door or turbine lifting speed door.，it is mainly composed of New energy battery factory building, Cold storage area, High-end automobile production line, Medical aseptic workshop and Airport freight passage，This productThe overall structural design is simple and novel.，in the course of work,Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops.，it has been widely used in new energy, automobile, automobile, airport, medicine and other industries，is an advanced Electronic Factory Dust-Proof Clean Spiral Door developed by our company in combination with the actual situation of the industry。

Electronic Factory Dust-Proof Clean Spiral Door

2、Functional advantages of Electronic Factory Dust-Proof Clean Spiral Door

Electronic Factory Dust-Proof Clean Spiral Doors have the following advantages.

1. Adapt to complex environment

No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.

2. Good wind resistance

It can resist strong wind, and the special structure and material selection make the door body stable in bad weather. It is suitable for factories, warehouses and other places with high requirements for building protection in coastal areas.

3. Excellent sealing performance

The edge and middle of the door panel are equipped with EPDM rubber strip, which, together with the tight structural design, effectively blocks dust, wind and rain, insects and peculiar smell, keeps the indoor environment clean, and provides a strong guarantee for industries that require high cleanliness, such as food processing and electronic manufacturing.

4. Rugged, durable and reliable

The door body is made of double-layer stretched aluminum plate, which is much stronger than ordinary color steel plate. Equipped with turbine track system, it runs smoothly, and the door panels do not touch each other when rolled up, which greatly reduces wear and deformation, has low annual maintenance cost and stable long-term use performance.

5. Low noise and quiet operation

The polyurethane guide wheel slides in the aluminum alloy track, which has low noise during operation, creates a relatively quiet environment for workshops, warehouses and other working areas, and reduces noise interference.

Electronic Factory Dust-Proof Clean Spiral Door

3、Electronic Factory Dust-Proof Clean Spiral Door application

Electronic Factory Dust-Proof Clean Spiral Doors have the following purposes.

1. New energy battery factory building

Stable wind resistance, sealing and dust isolation, providing a stable environment for the production of new energy batteries and ensuring product quality.

2. Airport freight passage

Resist bad weather such as strong wind, pass quickly and efficiently, and meet the frequent transportation needs of airport freight.

3. Cold storage area

Good thermal insulation performance, reducing cold loss, fast opening and closing to reduce cold loss when opening the door, saving energy.

4. Medical aseptic workshop

Tightly sealed and insulated, to prevent air convection pollution, to maintain a sterile environment in the workshop, in line with pharmaceutical production standards.

5. High-end automobile production line

Ultra-high-speed opening and closing match the rhythm of automobile production, which is firm and impact-resistant, ensuring the efficient operation of the production line.

Electronic Factory Dust-Proof Clean Spiral Door

4、Structural advantages of Electronic Factory Dust-Proof Clean Spiral Door

The Electronic Factory Dust-Proof Clean Spiral Door has the following structure

1. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

2. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

3. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

4. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

5. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

Electronic Factory Dust-Proof Clean Spiral Door

5、Electronic Factory Dust-Proof Clean Spiral Door quotation

The Electronic Factory Dust-Proof Clean Spiral Door price is introduced as follows:

1. market factors

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. Anbixin door industry has a deep understanding of this factor, so the price of our Electronic Factory Dust-Proof Clean Spiral Door is more reasonable.

2. Quality advantages and disadvantages

Anbixin attaches great importance to the quality of products, which can be reflected in the manufacturing process of Electronic Factory Dust-Proof Clean Spiral Door and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

3. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Electronic Factory Dust-Proof Clean Spiral Door

6、Brief introduction of Anbixin door industry

Anbixin is a professional manufacturer of {产品系列}, which produces Electronic Factory Dust-Proof Clean Spiral Door with the advantage is The polyurethane guide wheel slides in the aluminum alloy track, so the noise is low during operation, which creates a relatively quiet environment for workshops, warehouses and other working areas and reduces noise interference.、Double light curtain induction and emergency stop device are standard, which can respond quickly when encountering obstacles; Some products are also equipped with airbags, wire rope breakage protection, etc., to ensure the safety of personnel and goods in all directions.、High-speed opening and closing, meeting the requirements of high frequency and high efficiency, and improving work efficiency.、The color of the door body is diverse. Besides the primary color of aluminum alloy, it can also be customized in colors such as sky blue, pearl white, China red, etc. The surface is pressed with stripes, which is simple and generous, which can enhance the overall image of the building and adapt to various architectural styles.、The polyurethane guide wheel slides in the aluminum alloy track, so the noise is low during operation, which creates a relatively quiet environment for workshops, warehouses and other working areas and reduces noise interference. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

Anbixin door industry

Electronic Factory Dust-Proof Clean Spiral Dooris a Electronic Factory Dust-Proof Clean Spiral Door，it is widely used in new energy, cold store, airport, cold store, automobile and other industries。