What is a Industrial Inductive Spiral Door? How much is the price of the High speed Spiral Door?

Industrial Inductive Spiral DoorIt is a kind of high-performance industrial rapid door opening and closing equipment, which is mainly used in industrial workshops, warehousing and logistics places, and can realize rapid opening and closing, effectively isolate the space, prevent dust and keep warm.，Good thermal insulation,High-speed and efficient opening and closing,Good wind resistance,Quick opening and closing,Intelligent and convenient control，at work,High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel can open quickly, meeting the requirements of high frequency and high efficiency.，Widely used inHigh-end automobile production line,Medical aseptic workshop,Cold storage area,New energy battery factory building,Airport freight passage and so on，the advantage is The broken bridge design filled with polyurethane foam blocks indoor and outdoor heat conduction, effectively maintains indoor temperature stability, reduces energy consumption of air conditioning and heating, and has remarkable energy saving effect in cold storage and constant temperature workshop.、The color of the door body is diverse. Besides the primary color of aluminum alloy, it can also be customized in colors such as sky blue, pearl white, China red, etc. The surface is pressed with stripes, which is simple and generous, which can enhance the overall image of the building and adapt to various architectural styles.、It can resist strong wind, and the special structure and material selection make the door body stable in bad weather. It is suitable for factories, warehouses and other places with high requirements for building protection in coastal areas.、The door body is made of double-layer stretched aluminum plate, and its strength is super ordinary color steel plate. With the turbine track system, it runs smoothly, and the door panels do not touch each other when rolled up, which greatly reduces wear and deformation, can realize multiple operations, has low annual maintenance cost and stable long-term use performance.、No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably, with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.。The following is to introduce the Industrial Inductive Spiral Door:

1、Brief introduction of Industrial Inductive Spiral Door

Industrial Inductive Spiral DoorIt is a professional industrial door equipment with high wind resistance, high sealing and long service life, which adopts cemented carbide door panel and turbine drive technology.，The overall structural design is simple, diverse and beautiful.，Structure consists of Cold storage area, High-end automobile production line, Medical aseptic workshop, Airport freight passage, New energy battery factory building and so on。

Industrial Inductive Spiral Door

2、Industrial Inductive Spiral Door video

You can buy Industrial Inductive Spiral Door according to your needs and show you product videos.。

Industrial Inductive Spiral Door

As you can see from the live video.，Jiangsu anbixin internet of things technology co., ltd is a popular Industrial Inductive Spiral Door。

3、Advantages of Industrial Inductive Spiral Door principle

The Industrial Inductive Spiral Door has the following principles.

1. High speed drive

High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

2. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

3. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

4. Turbine guide

Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.

5. High speed drive

High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

Industrial Inductive Spiral Door

4、Industrial Inductive Spiral Door structure composition

The Industrial Inductive Spiral Door has the following structure

1. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

2. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

3. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

4. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

5. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

Industrial Inductive Spiral Door

5、How much is the Industrial Inductive Spiral Door?

The Industrial Inductive Spiral Door price is introduced as follows:

1. quality factor

As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.

2. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

3. Product configuration difference

The difference in Industrial Inductive Spiral Door configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, Anbixin door industry Industrial Inductive Spiral Door manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Industrial Inductive Spiral Door price can meet the purchasing needs of customers.

5. region

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Industrial Inductive Spiral Door

6、How to choose the right product manufacturer?

Choosing a suitable Industrial Inductive Spiral Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Industrial Inductive Spiral Door products that meet the demand and have good cost performance.。

Anbixin door industry

Industrial Inductive Spiral Doorat runtime,Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.，it is mainly composed of Medical aseptic workshop, Airport freight passage, High-end automobile production line, New energy battery factory building and Cold storage area，Industrial Inductive Spiral DoorThe overall structural design is simple and novel.，Also known as hard turbine door, industrial hard speed door or turbine lifting speed door, it is an automatic door body driven by motor, driven by turbine reel to quickly lift the hard door panel, and guided by unique track structure.。